From the Spec (LEDs up at the top right corner):
EXTPOWER LED1 A External Power Connected to VDD from Computer
GP0 STATE LED2 A Driven by EXTGP0 from Computer. Buffered
From elsewhere:
The two LEDs next to the solar power controller (Left side of board):
RED LED - When the battery is being charged it is on.
GREEN LED - When the battery is being charged it is on
I'll add this to the product page.
BPDumb question: What would both LED's: Green and Red signify that the battery was charging?
Page 5 of the product info shows RED on/Green Off = Charging while REDD off/Green on = completed
Also - talk about location of the LED's. From an orientation standpoint:
Looking down at the board with the words: SunAIrPlus and SwitchDoc Labs reading left to right
The solar panels and battery connect to the LEFT side of the board.
Beside the Solar panel input are 2 LED's
Then, the SWITCH is at the TOP of the board.....
Then, in the upper right corner are a green then a red LED next to JP13
Is the GREEN LED in the upper right corner next to JP13 led#1, EXTPOWER?
Then is the RED LED in the upper right corner next to HP13 led#2, GPO state?
Sorry to be a nit-picker but just want to make sure I understand what is what on the board
Thanks