axel
New Member
Posts: 23
|
Post by axel on Feb 18, 2019 6:56:39 GMT -8
Hello, I am running the Groove weather pi station for a quiet a while. There has been many problems with updateing onto wunderground. There were work-arounds 1 year ago I used.
Yesterday I went onto github and downloaded the newest version plus doing simple necessary changes to the config. Now it is again not working, not saving locally into the mysql nor updating onto wunderground.
I thought that this "should" be failry simple task ... can somone help me please.
thanks .axel
|
|
|
Post by SDL on Feb 18, 2019 17:11:18 GMT -8
When you updated, did you copy your config.py into conflocal.py as it suggested in the README.md?
If not, you have to reconfigure your config.py (and this time copy it over to conflocal.py and make your changes there).
BP
|
|
axel
New Member
Posts: 23
|
Post by axel on Feb 19, 2019 18:46:12 GMT -8
Did the changes, seems to be working now. Also seems to be much more stable then before, hope it stays like this.
Thanks! .axel
|
|
axel
New Member
Posts: 23
|
Post by axel on Feb 21, 2019 18:16:41 GMT -8
Ok, so it has been stable for 2 or 3 days showing good weather data. Thats a big improvment, thanks again!
One last thing: on my network sniffer I can see that my PI is pretty much constantly pinging to "blynk-cloud.com" In my config.py, the part with blynk is not commented out, but it says "USEBLYNK = False".
What can I do? I dont want to change to much right now since it is running so stable.
|
|
axel
New Member
Posts: 23
|
Post by axel on Feb 23, 2019 6:48:40 GMT -8
I unfortunality have to take this back, it is agai not working stable ... meaning it runs 2 or 3 days without any problem and then it shows for the temp vaule a constant number (see attached)
What could be the reason? Thanks .axel
Attachments:
|
|
|
Post by SDL on Feb 25, 2019 9:00:12 GMT -8
Outside temperature? Sounds like an AM2315 issue. Check out the thread in this forum.
BP
|
|