|
Post by leldredge on Apr 2, 2019 15:36:07 GMT -8
After much tribulation with the code from github.com/switchdoclabs/RaspberryPi-WeatherPiArduinoI kept getting MSbus busy. I will get it working later. And so I use the simpler code from github.com/switchdoclabs/SDL_Pi_Weather_80422I had some success. The wind direction is working but I can not get wind speed. The RJ 11 extension I have the yellow wire on the left side on one in in the right side on the other. I've even done a crossover and still, I cannot get the wind speed. I am a retired IT with much experience with UNIX systems and have done a lot of scripting.
|
|
|
Post by SDL on Apr 3, 2019 11:07:09 GMT -8
MSbus busy? What is that from?
Does the Rain bucket code work? The interface for the anemometer and rain bucket are identical. Both interrupt son GPIO lines. Wiring is what I would check with first.
BTW, I can't see your pictures above!
BP
|
|