|
Post by mdiorio on Jul 23, 2019 14:46:00 GMT -8
I got everything working, but it looks like the data is incorrect. Clearly the temperature and humidity should be outside, not inside.
Why is indoor temperature and humidity even an option here? Also - will we be able to use the WeatherStem app to view our stations? Mine isn't showing up yet, but I'm guessing it may just be a lag between registering it and when it becomes available in the app?
Thanks!
------------- Current State ------------- currentOutsideTemperature = 0.0 currentOutsideHumidity = 0.0 currentInsideTemperature = 24.56 currentInsideHumidity = 57.169 currentRain60Minutes = 0.0 currentSunlightVisible = 785.9712 currentSunlightIR = 174 currentSunlightUV = 0 currentSunlightUVIndex = 0.0 ScurrentWindSpeed = 0.0 ScurrentWindGust = 0.000558793544899 ScurrentWindDirection = 270.0 currentTotalRain = 0.0 currentBarometricPressure = 1003.03 currentAltitude = 91.0 currentSeaLevel = 1013.91988798 barometricTrend = True pastBarometricReading = 1003.03 Outdoor_AirQuality_Sensor_Value = 0 Hour24_Outdoor_AirQuality_Sensor_Value = 0 Indoor_AirQuality_Sensor_Value = 0
Testing the AM2315 shows proper data:
GPIO.setup(self.powerpin, GPIO.OUT) temperature: 23.8 humidity: 69.3 crc: 64097
temperature: 23.7 humidity: 69.1 crc: 64193
temperature: 23.7 humidity: 68.9 crc: 14944
|
|
|
Post by mdiorio on Jul 23, 2019 15:58:20 GMT -8
And after restarting a couple of times, it started working? Strange.
Other oddity - lightning detection
Console shows: currentAs3935Interrupt = 8 currentAs3935LastInterrupt = 0 currentAs3935LastDistance = 1 currentAs3935LastStatus = Lightning Detected 1km away. (16:51:21 - 2019/07/23) currentAs3935LastLightningTimeStamp = 1563925882.14
SkyWeather site shows 1km @ Sun 9:09pm
The Skys are perfectly clear. Skyweather shows no lightning within 200+ miles.
|
|
|
Post by mdiorio on Jul 25, 2019 10:33:13 GMT -8
So after a few days - we're back to things not working
------------- Current State ------------- currentOutsideTemperature = 0.0 currentOutsideHumidity = 0.0 currentInsideTemperature = 34.21 currentInsideHumidity = 34.891 currentRain60Minutes = 0.0 currentSunlightVisible = 2155.3824 currentSunlightIR = 598 currentSunlightUV = 0 currentSunlightUVIndex = 0.0 ScurrentWindSpeed = 2.23989562086 ScurrentWindGust = 4.09255308809 ScurrentWindDirection = 225 currentTotalRain = 0.0 currentBarometricPressure = 1010.03 currentAltitude = 91.0 currentSeaLevel = 1020.99588692 barometricTrend = True pastBarometricReading = 1010.03 Outdoor_AirQuality_Sensor_Value = 13 Hour24_Outdoor_AirQuality_Sensor_Value = 0 Indoor_AirQuality_Sensor_Value = 0 -------------
Again things stopped working.
After a reboot of the Pi: I'm at least getting outdoor temps again, but they are not accurate.
currentOutsideTemperature = 37.6 currentOutsideHumidity = 38.7 currentInsideTemperature = 34.73 currentInsideHumidity = 35.547 currentRain60Minutes = 0.0 currentSunlightVisible = 2152.7712 currentSunlightIR = 599 currentSunlightUV = 0 currentSunlightUVIndex = 0.0 ScurrentWindSpeed = 0.0 ScurrentWindGust = 0 ScurrentWindDirection = 180 currentTotalRain = 0.0 currentBarometricPressure = 1009.92 currentAltitude = 91.0 currentSeaLevel = 1020.88469265 barometricTrend = True pastBarometricReading = 1009.92 Outdoor_AirQuality_Sensor_Value = 0 Hour24_Outdoor_AirQuality_Sensor_Value = 0 Indoor_AirQuality_Sensor_Value = 0 -------------
It's reporting an outdoor temp of 99 degrees, but it's actually 83. It was reporting accurately the last few days though. Humidity is 42% but it's reporting 34%
So far I've been somewhat disappointed with this weather station. And now it's been two days with no responses on the only support forum provided.
|
|
|
Post by SDL on Jul 25, 2019 20:09:39 GMT -8
Sorry about the delay! I've been on vacation and just got back into town.
1) Inside temperature and humidity are great things to know about the state of the weather station (for fan control and thermal measurements).
2) I need to see the start of the program and device present data to see what is going on with your temperature device not reporting immediately.
3) Regarding the higher temperature reporting, that is almost certainly the way you have the AM2315 mounted. Close to a thermal mass or too much in the sun? Try moving the sensor to somewhere more in the shade.
BP
|
|