|
|
Post by mickey53usa on Jul 7, 2020 7:02:01 GMT -8
What is the difference between the two boards. They both use Grove connectors (I2C) and both have the RJ11 connectors. Would I be better off using the software build for the GroveWeather Pi Board. Most seems to be the same?
|
|
|
|
Post by SDL on Jul 8, 2020 6:25:29 GMT -8
Take a picture of the boards and post them here. Let's see what version you have.
BP
|
|
|
|
Post by mickey53usa on Jul 8, 2020 11:58:58 GMT -8
I know I have the WeatherPiArduino Board - I just wanted to know if there were significant differences because most of the "newer" software I have found is for the GrovePiWeatherboard. Photos of what I have are attached |
|
|
|
Post by SDL on Jul 8, 2020 15:43:06 GMT -8
I need closeups of the boards so I can read the manufacuers codes on the board.
BP
|
|
|
|
Post by mickey53usa on Jul 9, 2020 6:26:34 GMT -8
OK, here they are Attachments:
|
|
|
|
Post by SDL on Jul 13, 2020 12:37:31 GMT -8
I need to see the product code just above the grove connectors on the first board.
BP
|
|
