|
|
Post by pagerman on Dec 9, 2021 20:18:30 GMT -8
I have assembled and provisioned the wireless solar SkyCam.
I don't see it anywhere in the dash app or on the WeatherSTEM page.
What am I missing to set this up to work with SkyWeather2?
The camera connected to the Pi is working fine.
Thanks
|
|
|
|
Post by pagerman on Dec 9, 2021 21:01:35 GMT -8
I get this continuously:
WeatherSense Monitoring Software
Software Version V012
-----------------
Pending jobs:
readSensors (trigger: date[2021-12-09 22:59:13 CST], pending)
startMQTT (trigger: date[2021-12-09 22:59:13 CST], pending)
cleanPictures (trigger: cron[day='*', hour='3', minute='4'], pending)
cleanTimeLapses (trigger: cron[day='*', hour='3', minute='10'], pending)
buildTimeLapse (trigger: cron[day='*', hour='5', minute='30'], pending)
readSensors (trigger: date[2021-12-09 22:59:13 CST], pending)
-----------------
Scheduled Jobs
-----------------
######
Read Wireless Sensors
######
creating new MQTT instance
######
Read Wireless Sensors
######
Jobstore default:
cleanPictures (trigger: cron[day='*', hour='3', minute='4'], next run at: 2021-12-10 03:04:00 CST)
cleanTimeLapses (trigger: cron[day='*', hour='3', minute='10'], next run at: 2021-12-10 03:10:00 CST)
buildTimeLapse (trigger: cron[day='*', hour='5', minute='30'], next run at: 2021-12-10 05:30:00 CST)
-----------------
starting 433MHz scanning
######
connecting to broker
starting 433MHz scanning
######
Connected with result code 0
Connected with result code 0
Connected with result code 0
Connected with result code 0
Connected with result code 0
Connected with result code 0
Just the "Connected with result code 0"
Over and over....
|
|
|
|
Post by pagerman on Dec 9, 2021 21:02:33 GMT -8
Are there settings in SkyWeather2 setup that need to be changed/added?
|
|
|
|
Post by doxidad on Dec 10, 2021 5:15:26 GMT -8
A suggestion.
If you can connect a USB serial cable to the USB port on the FTDI USB interface board and look for MQTT_PORT= in the output stream (sends about every 50-60 seconds) and see what port it is trying to connect to on the PI. If it is 0, that is the problem. If it is 1883 the problem is somewhere else.
Also, What does the MQTT log found in /var/log/mosquitto/mosquitto.log have in it?
You're not seeing anything in the dash_app since you aren't receiving anything. Once you get picture data, a directory for the camera will be created. Dash looks for the directory and will show up on the dash status page as SkyCam xxxx where the xxxx is the hex number taken from the MAC of the camera's interface.
|
|
|
|
Post by pagerman on Dec 10, 2021 5:26:18 GMT -8
mosquitto.log:
1639086650: mosquitto version 2.0.11 terminating
1639086650: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639086657: mosquitto version 2.0.11 starting
1639086657: Config loaded from /etc/mosquitto/mosquitto.conf.
1639086657: Opening ipv4 listen socket on port 1883.
1639086657: Opening ipv6 listen socket on port 1883.
1639086657: mosquitto version 2.0.11 running
1639087184: New connection from ::1:45873 on port 1883.
1639087184: New client connected from ::1:45873 as SkyCam (p2, c1, k60).
1639087305: Client SkyCam closed its connection.
1639087305: mosquitto version 2.0.11 terminating
1639087305: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639087313: mosquitto version 2.0.11 starting
1639087313: Config loaded from /etc/mosquitto/mosquitto.conf.
1639087313: Opening ipv4 listen socket on port 1883.
1639087313: Opening ipv6 listen socket on port 1883.
1639087313: mosquitto version 2.0.11 running
1639087562: mosquitto version 2.0.11 terminating
1639087562: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639087570: mosquitto version 2.0.11 starting
1639087570: Config loaded from /etc/mosquitto/mosquitto.conf.
1639087570: Opening ipv4 listen socket on port 1883.
1639087570: Opening ipv6 listen socket on port 1883.
1639087570: mosquitto version 2.0.11 running
1639087585: New connection from ::1:44101 on port 1883.
1639087585: New client connected from ::1:44101 as SkyWeather2 (p2, c1, k60).
1639087585: New connection from ::1:41571 on port 1883.
1639087585: New client connected from ::1:41571 as SkyCam (p2, c1, k60).
1639089385: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639091187: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639092987: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639087313: Opening ipv6 listen socket on port 1883.
1639087313: mosquitto version 2.0.11 running
1639087562: mosquitto version 2.0.11 terminating
1639087562: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639087570: mosquitto version 2.0.11 starting
1639087570: Config loaded from /etc/mosquitto/mosquitto.conf.
1639087570: Opening ipv4 listen socket on port 1883.
1639087570: Opening ipv6 listen socket on port 1883.
1639087570: mosquitto version 2.0.11 running
1639087585: New connection from ::1:44101 on port 1883.
1639087585: New client connected from ::1:44101 as SkyWeather2 (p2, c1, k60).
1639087585: New connection from ::1:41571 on port 1883.
1639087585: New client connected from ::1:41571 as SkyCam (p2, c1, k60).
1639089385: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639091187: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639092987: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639094789: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639096590: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639098391: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639100192: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639101993: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639103794: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639105595: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639107396: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639109197: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639110997: Saving in-memory database to /var/lib/mosquitto//mosquitto.db.
1639112284: New connection from ::1:50495 on port 1883.
1639112284: Client SkyCam already connected, closing old connection.
1639112284: New client connected from ::1:50495 as SkyCam (p2, c1, k60).
1639112285: New connection from ::1:43561 on port 1883.
1639112285: Client SkyCam already connected, closing old connection.
1639112285: New client connected from ::1:43561 as SkyCam (p2, c1, k60).
1639112286: New connection from ::1:54131 on port 1883.
1639112286: Client SkyCam already connected, closing old connection.
1639112286: New client connected from ::1:54131 as SkyCam (p2, c1, k60).
1639112287: New connection from ::1:41993 on port 1883.
1639112287: Client SkyCam already connected, closing old connection.
1639112287: New client connected from ::1:41993 as SkyCam (p2, c1, k60).
1639112288: New connection from ::1:45893 on port 1883.
1639112288: Client SkyCam already connected, closing old connection.
1639112288: New client connected from ::1:45893 as SkyCam (p2, c1, k60).
1639112289: New connection from ::1:35123 on port 1883.
1639112289: Client SkyCam already connected, closing old connection.
1639112289: New client connected from ::1:35123 as SkyCam (p2, c1, k60).
1639112290: New connection from ::1:33307 on port 1883.
1639112290: Client SkyCam already connected, closing old connection.
1639112290: New client connected from ::1:33307 as SkyCam (p2, c1, k60).
1639112291: New connection from ::1:54597 on port 1883.
1639112291: Client SkyCam already connected, closing old connection.
1639112291: New client connected from ::1:54597 as SkyCam (p2, c1, k60).
|
|
|
|
Post by pagerman on Dec 10, 2021 5:38:46 GMT -8
Does something in SDL_Pi_WeatherSense need to be running?
|
|
|
|
Post by pagerman on Dec 10, 2021 6:24:59 GMT -8
No matter what terminal I use I get jibberish:
Íw[0C][08]ˆÌ[0C]Žˆ!09Bw[0C][0C][08][08][08]ˆ>˜
½>øŒöóèíÞS[08]N[08]‚ˆöó˜Îk
[08][08][08]+K¸žˆ„[0E]ž½
¿íÞS[08]ÊŠHŒ[0E]ž½
)k
[08]êJ¸žˆˆÖÂíÞS[08]Ž
‚¨Ö[02]Îk
[08][08][08]*¥[0C][0C]J[0E]H Žÿ1ŠˆØŸî¸
9Ïî¨ëŸþ[10]„ˆ[00]!¾Øæ_[08][08]ÄÖs[08]„ž!¾ŒûþÖν÷Ìó[0C][0C]ľÿwk÷ûˆø1Ãó!½Ø[10]O9Œ[10]_ïŸýÄÞ
÷ëO[04]öÖCoØök‚ŒÿùùŒÖ†8½!kÄ[08][00][00]þÖÄÞ
÷ëOˆ[08]˜¾)[08]L[0E]Š[0E]NŠøÖ†01HÄgÿ‡Öó÷Z¥HÌȈج{[04]9
È
È
Ȉ8ŒŒŒÄ[00][0F] î[0C]ŒŒŒŒ¸÷ækÊHÌÈJÄ[00]ÿ¾îˆ˜ïoŸ½¸÷˜gÞ)™k¨Þ߈Þæë÷HHÄ9½!ëŒ[0C]¿èž1[18][00][1C]LÈÂ[08][10]þŒLžŸ½È¾½¾÷ŒÄ[08][00][00]þÖÄÞ
÷ëO[00]Ö[00])®†
[08][08]8¸÷æˆÊHÌÈJÄ[00]ÿ¾îˆèÞ1o[08]Ä9Ï¥ˆØë[0E] Ÿ½1[0E][0E][0E][0E][0E][0E][0E][0E][0E]N[08][0E][0E][0E][0E][0E][0E][0E][0E][0E][0E][0E]Žˆcˆ¨žÿæßÄŒŒŒŒŒŒŒŒŒŒŒŒŒÈ):1ˆ[1C]¼¾01Ä!00_[08]Ä0˜íˆØî¸
1[08][0E]È
1JˆÄŽk[0C]
[08]ˆ˜ü 1ëë{
[08]ÄöoŸ½¸÷˜gÞÎNk¨Þ߈Þæë÷ˆ[0C]Ä9½!ëŒ[0C]¿èž1[18][00][1C]LÈÂ[08][10][04]ÖÃ[00][0F]ðX¸
¥[0C]ž1[18][00][1C]LÈ€[00]¾[10][10][08]ïȬîÈ÷툘ïoŸ½¸÷˜gÞ)™k¨Þ߈Þæë÷[08]«Ì9½!ëŒ[0C]¿èž1[18][00][1C]LÈÂ[08][10][04]ÖÃ[00][0F]0X¸
|
|
|
|
Post by SDL on Dec 10, 2021 8:48:54 GMT -8
Did you set the baud rate to 115200?
From the Mosquitto log it looks like SkyCam is connnecting properly to port 1883.
Is this our SDCard or your own? If it is your own, make sure you disable Mosquitto authentication.
Add
allow_anonymous true
to the bottom of your
/etc/mosquitto/mosquitto.conf file and then reboot.
BP
|
|
|
|
Post by doxidad on Dec 10, 2021 8:54:53 GMT -8
That looks like a baud ( serial speed) setting being off. Set your baud to 115200 (That's what the Arduino IDE uses). example of output showing the WiFi and the MQTT connection with the MQTT_PORT
WiFI Connected.
SSID=mySSID
psk=myPSK
IP Address: 192.168.200.146 <- Camera IP
WiFi Channel= 8
Gateway Address:192.168.200.1
Subnet Mask:255.255.255.0
--------
MQTT Start
--------
MQTT_IP=192.168.200.85 <- PI IP
MQTT_PORT=1883
Attempting MQTT connection...client name=SKYCAMWireless-5ade
connected
|
|
|
|
Post by doxidad on Dec 10, 2021 9:10:06 GMT -8
Actually looking back on your mosquitto log it looks like the camera is connecting on the correct 1883 port.
The thing is that it is using IPV6 - not sure that is a problem or not.
Each time it connects is has a different IPV6 address ?
|
|
|
|
Post by pagerman on Dec 10, 2021 9:56:31 GMT -8
Speed was it. Thanks. Here's what it's sending:
after
CPU Freq = 240 MHz
XTAL Freq = 40 MHz
APB Bus Clock Freq = 80000000 Hz
In Loop
T=22.83C, RH=36.54%
start of contrast delay
CLICK
Picture Size=38445
after take picture
setupWiFiandMQTT
GPIO0=1
RequestedReset=1
Using existing SSID/psk
SSID=DEA_VAN_196
psk=
Waiting for Saved WiFi
...
WiFI Connected.
SSID=DEA_VAN_196
psk=
IP Address: 192.168.0.26
WiFi Channel= 6
Gateway Address:192.168.0.1
Subnet Mask:255.255.255.0
--------
MQTT Start
--------
MQTT_IP=192.168.0.22
MQTT_PORT=0
Attempting MQTT connection...client name=SKYCAMWireless-3465
connected
sub to topic=SKYCAM/9865/COMMANDS
----Writing Preferences---
SSID=DEA_VAN_196
psk=
Admin Password:ad******
MQTT_IP=192.168.0.22
MQTT_PORT=0
time_to_sleep=50
contrast_delay=1000
Sensor Settings=0;0;0;0;1;1;0;1;0;0;300;1;0;0;0;1;1;1;0;0;1;0;
blinkLight=1
frame_size=9
--------------------------
rssi:-33
numberOfFullChunks=17
lastChunkSize=195
Chunk Count=0
start of chunk=0 / end of chunk=2249
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-d32f
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 1 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-e594
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 1 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-943a
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 1 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=1
start of chunk=2250 / end of chunk=4499
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-74d4
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 2 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-3d5c
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 2 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-81d
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 2 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=2
start of chunk=4500 / end of chunk=6749
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-6e5a
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 3 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-4e43
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 3 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-52e8
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 3 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=3
start of chunk=6750 / end of chunk=8999
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-e2ea
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 4 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-1f0d
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 4 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-8f8b
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 4 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=4
start of chunk=9000 / end of chunk=11249
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-663f
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 5 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-f046
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 5 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-651d
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 5 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=5
start of chunk=11250 / end of chunk=13499
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-8738
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 6 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-b15
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 6 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-47a1
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 6 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=6
start of chunk=13500 / end of chunk=15749
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-c06c
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 7 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-31ba
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 7 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-e7b4
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 7 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=7
start of chunk=15750 / end of chunk=17999
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-4f25
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 8 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-d5dc
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 8 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-91b2
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 8 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=8
start of chunk=18000 / end of chunk=20249
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-2e58
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 9 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-b444
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 9 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-7872
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 9 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=9
start of chunk=20250 / end of chunk=22499
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-21b5
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 10 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-826a
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 10 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-6c49
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 10 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=10
start of chunk=22500 / end of chunk=24749
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-68c6
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 11 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-4892
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 11 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-519a
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 11 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=11
start of chunk=24750 / end of chunk=26999
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-3885
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 12 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-60ab
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 12 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-25bc
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 12 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=12
start of chunk=27000 / end of chunk=29249
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-241b
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 13 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-41e6
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 13 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-c046
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 13 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=13
start of chunk=29250 / end of chunk=31499
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-ad37
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 14 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-34bb
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 14 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-916b
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 14 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=14
start of chunk=31500 / end of chunk=33749
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-3ea8
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 15 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-1ebb
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 15 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-2538
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 15 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=15
start of chunk=33750 / end of chunk=35999
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-9af2
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 16 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-9760
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 16 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-d3d5
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 16 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Chunk Count=16
start of chunk=36000 / end of chunk=38249
fb->len = 38445
ChunkStringLength=3000
Attempting MQTT connection...client name=SKYCAMWireless-ddde
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 17 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-ddfb
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 17 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
Attempting MQTT connection...client name=SKYCAMWireless-b3d2
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Chunk 17 of 18
Topic=SKYCAM/9865/PICTURECHUNKS
MQTT publish result=0
->>>>Chunk Failure<<<<<
Size of image:38445
Shape->width:800height:600
sendMQTTStats
Attempting MQTT connection...client name=SKYCAMWireless-8705
connected
sub to topic=SKYCAM/9865/COMMANDS
Sending MQTT Packet
{"id": "9865", "messageid": "1083", "messagetype": "4", "softwareversion": "22", "sunairplusdevicepresent": "0", "hdc1080devicepresent": "1", "internaltemperature": "22.83", "internalhumidity": "36.54", "currentrssi": "-33", "batteryvoltage": "0.00", "batterycurrent": "0.00", "loadvoltage": "0.00", "loadcurrent": "0.00", "solarpanelvoltage": "0.00", "solarpanelcurrent": "0.00", "gndrreboots": "0"}
Topic=SKYCAM/9865/INFO
MQTT publish result=0
----Writing MessageID Preferences---
MessageID=1084
--------------------------
RequestedReset=1
GPIO0=1
No Sleep - vTask Delay
reducing power
disable radio
after
CPU Freq = 10 MHz
XTAL Freq = 40 MHz
APB Bus Clock Freq = 10000000 Hz
|
|
|
|
Post by SDL on Dec 10, 2021 11:13:46 GMT -8
OK. You have the MQTT Port 0 problem. I just looked at this. Everything else is working, but it's not going to 1883.
This has something to do with provisioning, so I would suggest you reprovision the SkyCam.
MQTT_IP=192.168.0.22
MQTT_PORT=0
Search on this issue on the forum. We've been over this a few times.
BP
|
|
|
|
Post by pagerman on Dec 11, 2021 12:53:57 GMT -8
Ok. I searched but there's no way to reset the camera to go back to AP mode?
I have to shut down my network to do so?
|
|
|
|
Post by doxidad on Dec 11, 2021 17:17:05 GMT -8
Yep - shut down our WiFi for about 5 minutes or so till you see the camera's AP show up.
|
|
|
|
Post by pagerman on Dec 12, 2021 10:05:40 GMT -8
Ok. I actually took it to a different location. LOL
It went back to AP mode and I reprovisioned it. I typed in the 1883 in the MQTT field.
It's still showing MQTT_PORT=0
MQTT Start
--------
MQTT_IP=192.168.0.22
MQTT_PORT=0
Attempting MQTT connection...client name=SKYCAMWireless-65b1
connected
sub to topic=SKYCAM/9865/COMMANDS
----Writing Preferences---
SSID=DEA_VAN_196
psk=
Admin Password:ad******
MQTT_IP=192.168.0.22
MQTT_PORT=0
time_to_sleep=50
Help.
|
|
