|
Post by Powderjockey on May 3, 2023 15:10:21 GMT -8
I'm wondering if I have something not set correctly as there is nothing showing in Dash for the WR3Power.
Any ideas? Thanks Scott
|
|
|
Post by SDL on May 7, 2023 15:24:29 GMT -8
Show us the first 200 lines or so of the serial output from the Mini Pro Plus. From the USB plug.
That will tell us if you are talking to the Renogy. Could be a wiring problem.
BP
|
|
|
Post by Powderjockey on May 8, 2023 18:33:59 GMT -8
Show us the first 200 lines or so of the serial output from the Mini Pro Plus. From the USB plug. That will tell us if you are talking to the Renogy. Could be a wiring problem. BP Attached is the output from the WR3 serial output WR3 Serial Output.txt (30.5 KB)
|
|
|
Post by Powderjockey on Jun 13, 2023 15:37:16 GMT -8
I've rechecked the wiring, there are only 6 to the Wanderer, and they all appear to be going where they should.
|
|
|
Post by SDL on Jun 26, 2023 13:39:41 GMT -8
It has to be a wiring problem between the Reneogy and the Mini Pro Plus. Wire that isn't connecting? You re reading the WeatherRack3 but you get nothing from the Wanderer.
BP
|
|