|
|
Post by gorddel on Oct 18, 2023 18:00:33 GMT -8
Could you point me anywhere to a cable to extend the sensor - I'm not sure of the connector type on the sensor head.
Thanks,
Gord
|
|
|
|
Post by Powderjockey on Oct 23, 2023 17:17:51 GMT -8
Could you point me anywhere to a cable to extend the sensor - I'm not sure of the connector type on the sensor head.
Thanks,
Gord
Gord, I purchased this cable and then spliced the original end onto it. I used these to do the slicing. I will use some shrink wrap to complete the job. I had the complete coil connected to the unit and it worked fine on the test bench. |
|
|
|
Post by gorddel on Oct 25, 2023 10:49:01 GMT -8
Thanks, Scott. I'll pick up some of that cable - it's good to know that length isn't an issue. I was really wondering if the connector used on the sensor head has an industry standard name/number/spec and where I could find a connector that would mate to it. I haven't received my unit yet - still in shipping from Alibaba.
|
|
|
|
Post by Powderjockey on Oct 26, 2023 17:56:28 GMT -8
|
|
