weatherpi
New Member
Posts: 15 
Raspberry Pi: Yes
|
Post by weatherpi on Jan 1, 2018 8:49:40 GMT -8
Went to re-read the control panel info to install it on my second Weather station but the milo creek site has been down for days.
Is there somewhere else to read the installation instructions?
happy new year.
|
|
acta
New Member
Posts: 2
|
Post by acta on Jan 2, 2018 2:41:18 GMT -8
Happy new year,
I also want to find the installation instructions of RasPiConnect by Milocreek, the site seems to be down.
Thanks in advance
|
|
|
|
Post by SDL on Jan 2, 2018 8:22:12 GMT -8
It's up now!
BP
|
|
acta
New Member
Posts: 2
|
Post by acta on Jan 2, 2018 18:10:54 GMT -8
Thanks for quick response!
|
|
|
|
Post by evilleweather on Jan 22, 2018 14:36:09 GMT -8
milocreek.com is down again. It has this response: Their Github location is here: github.com/milocreek/The problem is this is the only thing in their README.md file: That doesn't help.
|
|
|
|
Post by mikethechap on Jan 24, 2018 2:46:12 GMT -8
I gave up on the whole MiloCreek interfaces. Too much of a learning curve, basically iOS only, I did see more downtimr than I liked, and the instructions were cryptic. There's no doubt it's well intended with its seafaring design. Perhaps more important, the case for it's use was strong: if I remember rightly it monitored the first distant weather station that formed the Curocao Project. It was the basis for what we have now. As such, it kept a close eye on power issues since the station was using solar unattended for much of the time. So,the MiloCreek stuff has a lot of power-related graphs, etc. I guess what I'm saying is that those power graphs were very relevant to where Switchdoc is now with Patting the Dog, Watchdog Timers, etc.
|
|
|
|
Post by SDL on Jan 25, 2018 19:52:25 GMT -8
We get that. We are now in the process of moving the entire MiloCreek Wiki for RasPiConnect to our servers where we have better connectivity.
We will post here when we are done. Wikis are ugly to transfer.
Best regards,
BP
|
|
shepherdspi
New Member
Posts: 3
Raspberry Pi: Yes
Other Device: RaspPi A, 2B, Arduino Uno
|
Post by shepherdspi on Mar 22, 2018 9:41:55 GMT -8
What is the address for the RaspiConnect manual and code. The www.milocreek.com site has been sold and I can not use my Apple IOS app? Disappointed. |
|
|
|
Post by SDL on Mar 23, 2018 7:32:35 GMT -8
We have that on our list for next week. We will bring up the data from the old site. The server crashed and we are reconstructing the data.
BP
|
|
shepherdspi
New Member
Posts: 3
Raspberry Pi: Yes
Other Device: RaspPi A, 2B, Arduino Uno
|
Post by shepherdspi on Mar 26, 2018 5:08:22 GMT -8
I look forward to that thanks
|
|
shepherdspi
New Member
Posts: 3
Raspberry Pi: Yes
Other Device: RaspPi A, 2B, Arduino Uno
|
Post by shepherdspi on Apr 17, 2018 13:08:27 GMT -8
Any news about the milocreek site update
|
|
|
|
Post by SDL on Apr 18, 2018 10:26:34 GMT -8
Still on board for next week to get this up and running. Disk problems.
BP
|
|
|
|
Post by WX on Apr 22, 2018 9:46:48 GMT -8
|
|
|
|
Post by sergej on Aug 11, 2018 5:25:18 GMT -8
Any place where I can find last version of RasPiConnect server and short readme or install/setup guide or so?
|
|
|
|
Post by SDL on Aug 12, 2018 12:39:42 GMT -8
All the documentation is on the Milocreek.com site, which is down. I'll ask BP to take a look at it his week.
John
|
|
