|
|
Post by yulaguilos on Sept 25, 2018 15:01:35 GMT -8
Hi - Can I use Grove Weather Sensor instead of Sunlight SI1145 in my WeatherPi? Where do i connect it?
Thanks,
Yul
|
|
|
|
Post by SDL on Sept 26, 2018 10:27:29 GMT -8
What is the Grove weather Sensor? Give us a link please and we will take a look at it!
BP
|
|
|
|
Post by yulaguilos on Sept 26, 2018 18:16:37 GMT -8
|
|
|
|
Post by yulaguilos on Sept 27, 2018 17:48:44 GMT -8
but is there a program to download or the Sunlight SI1145 code will work? If not, where can i get it? Please see me separate questions in another thread. I am stucked  |
|
|
|
Post by SDL on Sept 27, 2018 18:13:50 GMT -8
The UV sensor is NOT an I2C device. I was mistaken. You can go to the shop.switchdoc.com and look at the Arduino code. You will need to hook it up to an ADC port and read the data. SI1145 code will not work. You will need to write some Python code to work with your ADC board if you are using an Raspberry Pi.
BP
|
|
|
|
Post by yulaguilos on Sept 27, 2018 18:20:48 GMT -8
|
|
|
|
Post by SDL on Sept 28, 2018 9:02:42 GMT -8
I expect it will. We have never tested it.
BP
|
|
