|
Post by SDL on May 21, 2023 15:32:20 GMT -8
Ouch! Lots of heat!
BP
|
|
|
Post by SDL on May 21, 2023 9:38:19 GMT -8
No, the wind vane is an analog value and has to run through the ADC. Check out the drivers for the board on GitHub.com/switchdoclabs. You read the ADC to get the wind direction.
BP
|
|
|
Post by SDL on May 19, 2023 16:18:09 GMT -8
Battery Voltage: 0.00 V Battery Current: 0.00 mA Solar Panel Voltage: 0.00 V Solar Current: 0.00 mA Load Voltage: 0.00 V Load Current: 0.00 mA Currentmillis() = 96216
You aren't reading the solar power stuff. Something is wired wrong.
Also, check your database. . Is there anything in the database from the lightning sensor?
BP
|
|
|
Post by SDL on May 19, 2023 16:15:00 GMT -8
What version of software are you using? What are you using to read the data in? I see you are using Graphana, so you probably have your own software. That's OK, but carefully read this post to look for errors (which we do) and make sure you have the latest SwitchDoc Labs rtl_433 on GitHub.com/switchdoclabs www.switchdoc.com/2022/12/weatherrack3-data-formats-2/BP
|
|
|
Post by SDL on May 19, 2023 16:12:40 GMT -8
Strange. data graphs don't update on either browser?
BP
|
|
|
Post by SDL on May 19, 2023 16:11:55 GMT -8
Thank you!
BP
|
|
|
Post by SDL on May 19, 2023 16:11:02 GMT -8
|
|
|
Post by SDL on May 19, 2023 16:09:46 GMT -8
Sounds like you are looking at the wrong plug. I am posting the schematic below so you can check it out. BP PiWeather.pdf (45.7 KB) PiWeather2.pdf (39.16 KB)
|
|
|
Post by SDL on May 19, 2023 16:04:30 GMT -8
Do you want a new utility board? I think you need one. Post a picture for sure.
1 SwitchDoc Labs Wr3 Utility Board – For an unpopulated board send a Self Addressed Stamped Envelope (two stamps) to: SwitchDoc Labs, ATTN: WR3 Board, 909 S Shelley Lake Lane, Spokane Valley, WA 99037
BP
|
|
|
Post by SDL on May 8, 2023 13:53:54 GMT -8
You can certainly change the programming to support others. It's a medium sized job. Nothing is compatible.
BP
|
|
|
Post by SDL on May 8, 2023 13:52:55 GMT -8
Well, report back to us after looking at it for an hour. That will provide a good clue.
BP
|
|
|
Post by SDL on May 8, 2023 13:52:01 GMT -8
Can you try Foxfire or Safari?
BP
|
|
|
Post by SDL on May 7, 2023 15:30:42 GMT -8
USPS must have found the package. That's a good thing. They have lost over $500 of orders in the last 6 months for us.
BP
|
|
|
Post by SDL on May 7, 2023 15:29:22 GMT -8
WeatherSTEM is not continuing support for SkyWeather2.
Sounds like they are starting to shut it down.
BP
|
|
|
Post by SDL on May 7, 2023 15:28:12 GMT -8
I'll look for some pictures, but I don't think they are deployed yet.
Extend the cable if you need to. Then you can have the box well away from the sensor. The WR3 uses RS485 which can go a long ways!
BP
|
|