Wiring issue

vesterm
New Member

Posts: 2

Wiring issue Feb 5, 2020 9:54:41 GMT -8

Quote

Post by vesterm on Feb 5, 2020 9:54:41 GMT -8

The instructions for the Thunderboard Lightning Detector Extender Kit show a jumper wire connecting the 5v pin on the 3V3 to 5V I2C convertor to a pin on the WeatherPlus board. The pictures show connection to a Version 1 board. I am using a Version 2 WeatherPlus board which has no pins. How should I connect this jumper wire?

Thanks

SDL
Global Moderator

Posts: 5,655
Raspberry Pi: Yes
Other Device: PC, arduino, beagleBone

Wiring issue Feb 6, 2020 11:20:01 GMT -8

Quote

Post by SDL on Feb 6, 2020 11:20:01 GMT -8

Ah, another documentation problem. You don't need the 3V to 5V converter for the Lightning kit on the V2 board. You just plug in the Thunderboard into an available I2C Grove plug on the V2 board.

You can see more by looking at this:

www.switchdoc.com/wp-content/uploads/2019/11/OurWeatherV2ExpansionAssembly-1.1.pdf

BP

vesterm New Member Posts: 2	Wiring issue Feb 6, 2020 17:26:13 GMT -8 via mobile SDL likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by vesterm on Feb 6, 2020 17:26:13 GMT -8 Got it. Thanks.

Post by vesterm on Feb 5, 2020 9:54:41 GMT -8

Post by SDL on Feb 6, 2020 11:20:01 GMT -8

Post by vesterm on Feb 6, 2020 17:26:13 GMT -8

Quick Reply