Post by Marc on Apr 15, 2020 5:36:38 GMT -8
Hi SDL,
found again a bug. Iam using the V057 Version. Iam trying to set the Thunderboard Parameters over:
www.switchdoc.com/OurWeatherAdmin.html
Site. If i fill out the fields including the Admin PW it is always saying wrong Admin Password, which is incorrect because iam using the correct admin password. if iam for example setting a new UTC offset everything is working with the same password.
So i tried the rest command:
getting the data:
192.168.0.33/ThunderBoardParams
{"ThunderBoardParams": "", "id": "1", "name": "OurWeather", "softwareversion": "057", "hardware": "esp32", "Controllerboard": "V2", "connected": true}
setting the data:
192.168.0.33/setThunderBoardParams?params=admin,2,1,7,0,2,2
{"return_value": 0, "id": "1", "name": "OurWeather", "softwareversion": "057", "hardware": "esp32", "Controllerboard": "V2", "connected": true}
Whats wrong here? Iam trying to setup the thunderboard values...
FullDatastring here:
{"variables": {"OurWeatherTime": "2020-04-15 15:35:01", "FullDataString": "17.55,24.54,24.23,102198.00,172.41,0.52,1.32,225.00,0.00,0.22,1.93,0.52,4.38,0.00,270.00,1,2020-04-15 15:35:01,Neocramencer_weather,17472,4,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,V:,WXLMB ,0,,,0,,,0,0.00,-5600", "FirmwareVersion": "057", "IndoorTemperature": 24.23, "BarometricPressure": 102198.00, "Altitude": 172.41, "OutdoorTemperature": 17.55, "OutdoorHumidity": 24.54, "CurrentWindSpeed": 0.52, "CurrentWindGust": 1.32, "CurrentWindDirection": 225.00, "Sunlight": 37889.00, "EnglishOrMetric": 1, "RainTotal": 0.00, "WindSpeedMin": 0.22, "WindSpeedMax": 1.93, "WindGustMin": 0.52, "WindGustMax": 4.38, "WindDirectionMin": 0.00, "WindDirectionMax": 270.00, "AirQualitySensor": 17472, "ThunderBoardLast": ",,0,,,0,", "ThunderBoardParams": "", "Controllerboard": "V2", "RSSI": -56, "ESP32HeapSize": 192216}, "id": "1", "name": "OurWeather", "softwareversion": "057", "hardware": "esp32", "Controllerboard": "V2", "connected": true}
By the way, we had DST change end of march. The board is not able to recognise a time change. Can you implement this.
Best regards
Marc
found again a bug. Iam using the V057 Version. Iam trying to set the Thunderboard Parameters over:
www.switchdoc.com/OurWeatherAdmin.html
Site. If i fill out the fields including the Admin PW it is always saying wrong Admin Password, which is incorrect because iam using the correct admin password. if iam for example setting a new UTC offset everything is working with the same password.
So i tried the rest command:
getting the data:
192.168.0.33/ThunderBoardParams
{"ThunderBoardParams": "", "id": "1", "name": "OurWeather", "softwareversion": "057", "hardware": "esp32", "Controllerboard": "V2", "connected": true}
setting the data:
192.168.0.33/setThunderBoardParams?params=admin,2,1,7,0,2,2
{"return_value": 0, "id": "1", "name": "OurWeather", "softwareversion": "057", "hardware": "esp32", "Controllerboard": "V2", "connected": true}
Whats wrong here? Iam trying to setup the thunderboard values...
FullDatastring here:
{"variables": {"OurWeatherTime": "2020-04-15 15:35:01", "FullDataString": "17.55,24.54,24.23,102198.00,172.41,0.52,1.32,225.00,0.00,0.22,1.93,0.52,4.38,0.00,270.00,1,2020-04-15 15:35:01,Neocramencer_weather,17472,4,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,V:,WXLMB ,0,,,0,,,0,0.00,-5600", "FirmwareVersion": "057", "IndoorTemperature": 24.23, "BarometricPressure": 102198.00, "Altitude": 172.41, "OutdoorTemperature": 17.55, "OutdoorHumidity": 24.54, "CurrentWindSpeed": 0.52, "CurrentWindGust": 1.32, "CurrentWindDirection": 225.00, "Sunlight": 37889.00, "EnglishOrMetric": 1, "RainTotal": 0.00, "WindSpeedMin": 0.22, "WindSpeedMax": 1.93, "WindGustMin": 0.52, "WindGustMax": 4.38, "WindDirectionMin": 0.00, "WindDirectionMax": 270.00, "AirQualitySensor": 17472, "ThunderBoardLast": ",,0,,,0,", "ThunderBoardParams": "", "Controllerboard": "V2", "RSSI": -56, "ESP32HeapSize": 192216}, "id": "1", "name": "OurWeather", "softwareversion": "057", "hardware": "esp32", "Controllerboard": "V2", "connected": true}
By the way, we had DST change end of march. The board is not able to recognise a time change. Can you implement this.
Best regards
Marc