|
|
Post by fraggle on Jul 19, 2020 7:38:54 GMT -8
My kit came with a very nice enclosure for the rain gauge and wind direction/speed with a small solar cell.
I don't see any of the LoRA chips. 0240-THNDRBRD-DSBT is back ordered, that's OK.
-- But I have no idea where to start here. I can't find any documentation that references this housing or what I need to get it up and running! It almost looks like there is at least (one?) chip/module missing.
Photo:
|
|
|
|
Post by SDL on Jul 19, 2020 11:38:40 GMT -8
Do you have an order number so I can check on what you ordered?
The photo did not come through.
I think you have the wrong WeatherRack for the project. We will send you the correct one.
BP
|
|
|
|
Post by fraggle on Jul 19, 2020 12:26:52 GMT -8
Do you have an order number so I can check on what you ordered? The photo did not come through. I think you have the wrong WeatherRack for the project. We will send you the correct one. BP Order number #3667
Depending on what's missing, I'm OK with either the support hardware for the rack I have, or the "right rack"? I can solder if need be.
I have the rest of the stuff running already. This is going to be a really neat project.
|
|
|
|
Post by SDL on Jul 19, 2020 12:58:49 GMT -8
You have the wrong WeatherRack. We accidentally sent out the wrong weatherrack to three customers and you won the lottery for the third one!
We will get this fixed shortly. You will hear from Cindy.
BP
|
|
