Post by SDL on Dec 31, 2020 6:17:42 GMT -8
Here is how to factory reset the SGS2 Wireless Extender.
1) Power off your board.
2) Hold down the Aux Button
3) Apply power to the board
4) Release the Aux button when you see the SGS Logo appear on the OLED.
Now the board is reset to it's factory default state and you can set it up again.
BP
1) Power off your board.
2) Hold down the Aux Button
3) Apply power to the board
4) Release the Aux button when you see the SGS Logo appear on the OLED.
Now the board is reset to it's factory default state and you can set it up again.
BP
