WeatherSense Data

wshealy
Full Member

Posts: 187
Raspberry Pi: Yes

WeatherSense Data Mar 3, 2021 22:19:47 GMT -8

Quote

Post by wshealy on Mar 3, 2021 22:19:47 GMT -8

This looks way cool. If I could just get past this error and what Generic Wireless Motion of course with the error Dash gets no data.

pi@Sky:~/SDL_Pi_WeatherSense $ sudo python3 WeatherSenseMonitor.py

Pending jobs:

readSensors (trigger: date[2021-03-04 00:58:46 EST], pending)

-----------------

Scheduled Jobs

######

Read Wireless Sensors

######

-----------------

Jobstore default:

No scheduled jobs

-----------------

starting 433MHz scanning

######

Also typos in readme

sudo -u root -p ....
should be
sudo mysql -u ...

sudo apt-get install python3-dev libmysql
libmysql not found

also a couple references to a directory SDL_Pi_WeatherSenseWireless which should omit Wireless.
Details Details

W

Last Edit: Mar 4, 2021 17:16:52 GMT -8 by wshealy

Jason
Senior Member

Posts: 482
Raspberry Pi: Yes

WeatherSense Data Mar 4, 2021 4:23:24 GMT -8

Quote

Post by Jason on Mar 4, 2021 4:23:24 GMT -8

My guess is the data being read by the radio is not able to be parsed the Python3 JSON library. I'd suggest you add the following line of code inside the function readSensors():

print(sLine)
immediately after the following line:

sLine = line.decode()
Once added, save the file and restart the WeatherSenseMonitor.py script and post the results.

Jason

wshealy
Full Member

Posts: 187
Raspberry Pi: Yes

WeatherSense Data Mar 4, 2021 7:13:47 GMT -8

Quote

Post by wshealy on Mar 4, 2021 7:13:47 GMT -8

pi@Sky:~/SDL_Pi_WeatherSense $ sudo python3 WeatherSenseMonitor.py
Pending jobs:
readSensors (trigger: date[2021-03-04 10:05:18 EST], pending)
-----------------
Scheduled Jobs

######
Read Wireless Sensors
######
-----------------
Jobstore default:
No scheduled jobs
-----------------
starting 433MHz scanning
######
rtl_433 version -128-NOTFOUND branch master at 202010011416 inputs file rtl_tcp RTL-SDR

Use -h for usage help and see triq.org/ for documentation.

Trying conf file at "rtl_433.conf"...

Trying conf file at "/root/.config/rtl_433/rtl_433.conf"...

Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...

Trying conf file at "/etc/rtl_433/rtl_433.conf"...

quiet option (-q) is default and deprecated. See -v to increase verbosity

Protocol number specified (148) is larger than number of protocols

= Supported device protocols =

[01] Silvercrest Remote Control

[02] Rubicson Temperature Sensor

[03] Prologue Temperature Sensor

[04] Waveman Switch Transmitter

[06]* ELV EM 1000

[07]* ELV WS 2000

[08] LaCrosse TX Temperature / Humidity Sensor

[10]* Acurite 896 Rain Gauge

[11] Acurite 609TXC Temperature and Humidity Sensor

[12] Oregon Scientific Weather Sensor

[13]* Mebus 433

[14]* Intertechno 433

[15] KlikAanKlikUit Wireless Switch

[16] AlectoV1 Weather Sensor (Alecto WS3500 WS4500 Ventus W155/W044 Oregon)

[17] Cardin S466-TX2

[18] Fine Offset Electronics, WH2, WH5, Telldus Temperature/Humidity/Rain Sensor

[19] Nexus Temperature & Humidity Sensor

[20] Ambient Weather Temperature Sensor

[21] Calibeur RF-104 Sensor

[22]* X10 RF

[23] DSC Security Contact

[24]* Brennenstuhl RCS 2044

[25] Globaltronics GT-WT-02 Sensor

[26] Danfoss CFR Thermostat

[29] Chuango Security Technology

[30] Generic Remote SC226x EV1527

processing Generic Data
This is the raw data: [30] Generic Remote SC226x EV1527

[31] TFA-Twin-Plus-30.3049, Conrad KW9010, Ea2 BL999

[32] Fine Offset Electronics WH1080/WH3080 Weather Station

[33] WT450, WT260H, WT405H

[34] LaCrosse WS-2310 / WS-3600 Weather Station

[35] Esperanza EWS

[36] Efergy e2 classic

[37]* Inovalley kw9015b, TFA Dostmann 30.3161 (Rain and temperature sensor)

[38] Generic temperature sensor 1

processing Generic Data
This is the raw data: [38] Generic temperature sensor 1

[39] WG-PB12V1 Temperature Sensor

[40] Acurite 592TXR Temp/Humidity, 5n1 Weather Station, 6045 Lightning

[41] Acurite 986 Refrigerator / Freezer Thermometer

[42] HIDEKI TS04 Temperature, Humidity, Wind and Rain Sensor

[43] Watchman Sonic / Apollo Ultrasonic / Beckett Rocket oil tank monitor

[44] CurrentCost Current Sensor

[45] emonTx OpenEnergyMonitor

[46] HT680 Remote control

[47] Conrad S3318P Temperature & Humidity Sensor

[48] Akhan 100F14 remote keyless entry

[49] Quhwa

[50] OSv1 Temperature Sensor

[51] Proove / Nexa / KlikAanKlikUit Wireless Switch

[52] Bresser Thermo-/Hygro-Sensor 3CH

[53] Springfield Temperature and Soil Moisture

[54] Oregon Scientific SL109H Remote Thermal Hygro Sensor

[55] Acurite 606TX Temperature Sensor

[56] TFA pool temperature sensor

[57] Kedsum Temperature & Humidity Sensor, Pearl NC-7415

[58] Blyss DC5-UK-WH

[59] Steelmate TPMS

[60] Schrader TPMS

[61]* LightwaveRF

[62]* Elro DB286A Doorbell

[63] Efergy Optical

[64]* Honda Car Key

[67] Radiohead ASK

[68] Kerui PIR / Contact Sensor

[69] Fine Offset WH1050 Weather Station

[70] Honeywell Door/Window Sensor

[71] Maverick ET-732/733 BBQ Sensor

[72]* RF-tech

[73] LaCrosse TX141-Bv2, TX141TH-Bv2, TX141-Bv3, TX141W sensor

[74] Acurite 00275rm,00276rm Temp/Humidity with optional probe

[75] LaCrosse TX35DTH-IT, TFA Dostmann 30.3155 Temperature/Humidity sensor

[76] LaCrosse TX29IT Temperature sensor

[77] Vaillant calorMatic VRT340f Central Heating Control

[78] Fine Offset Electronics, WH25, WH32B, WH24, WH65B, HP1000 Temperature/Humidity/Pressure Sensor

[79] Fine Offset Electronics, WH0530 Temperature/Rain Sensor

[80] IBIS beacon

[81] Oil Ultrasonic STANDARD FSK

[82] Citroen TPMS

[83] Oil Ultrasonic STANDARD ASK

[84] Thermopro TP11 Thermometer

[85] Solight TE44

[86] Wireless Smoke and Heat Detector GS 558

[87] Generic wireless motion sensor

processing Generic Data
This is the raw data: [87] Generic wireless motion sensor

[88] Toyota TPMS

[89] Ford TPMS

[90] Renault TPMS

[91] inFactory

[92] FT-004-B Temperature Sensor

[93] Ford Car Key

[94] Philips outdoor temperature sensor (type AJ3650)

[95] Schrader TPMS EG53MA4, PA66GF35

[96] Nexa

[97] Thermopro TP08/TP12/TP20 thermometer

[98] GE Color Effects

[99] X10 Security

[100] Interlogix GE UTC Security Devices

[101]* Dish remote 6.3

[102] SimpliSafe Home Security System (May require disabling automatic gain for KeyPad decodes)

[103] Sensible Living Mini-Plant Moisture Sensor

[104] Wireless M-Bus, Mode C&T, 100kbps (-f 868950000 -s 1200000)

[105]* Wireless M-Bus, Mode S, 32.768kbps (-f 868300000 -s 1000000)

[106]* Wireless M-Bus, Mode R, 4.8kbps (-f 868330000)

[107]* Wireless M-Bus, Mode F, 2.4kbps

[108] Hyundai WS SENZOR Remote Temperature Sensor

[109] WT0124 Pool Thermometer

[110] PMV-107J (Toyota) TPMS

[111] Emos TTX201 Temperature Sensor

[112] Ambient Weather TX-8300 Temperature/Humidity Sensor

[113] Ambient Weather WH31E Thermo-Hygrometer Sensor

[114] Maverick et73

[115] Honeywell ActivLink, Wireless Doorbell

[116] Honeywell ActivLink, Wireless Doorbell (FSK)

[117]* ESA1000 / ESA2000 Energy Monitor

[118]* Biltema rain gauge

[119] Bresser Weather Center 5-in-1

[120]* Digitech XC-0324 temperature sensor

[121] Opus/Imagintronix XT300 Soil Moisture

[122]* FS20

[123]* Jansite TPMS Model TY02S

[124] LaCrosse/ELV/Conrad WS7000/WS2500 weather sensors

[125] TS-FT002 Wireless Ultrasonic Tank Liquid Level Meter With Temperature Sensor

[126] Companion WTR001 Temperature Sensor

[127] Ecowitt Wireless Outdoor Thermometer WH53/WH0280/WH0281A

[128] DirecTV RC66RX Remote Control

[129]* Eurochron temperature and humidity sensor

[130]* IKEA Sparsnäs Energy Meter Monitor

[131] Microchip HCS200 KeeLoq Hopping Encoder based remotes

[132] TFA Dostmann 30.3196 T/H outdoor sensor

[133] Rubicson 48659 Thermometer

[134] Holman Industries iWeather WS5029 weather station (newer PCM)

[135] Philips outdoor temperature sensor (type AJ7010)

[136] ESIC EMT7110 power meter

[137] Globaltronics QUIGG GT-TMBBQ-05

[138] Globaltronics GT-WT-03 Sensor

[139] Norgo NGE101

[140] Elantra2012 TPMS

[141] Auriol HG02832, HG05124A-DCF, Rubicson 48957 temperature/humidity sensor

[142] Fine Offset Electronics/ECOWITT WH51 Soil Moisture Sensor

[143] Holman Industries iWeather WS5029 weather station (older PWM)

[144] TBH weather sensor

Job "readSensors (trigger: date[2021-03-04 10:05:18 EST], next run at: 2021-03-04 10:05:18 EST)" raised an exception
Traceback (most recent call last):
File "/usr/local/lib/python3.7/dist-packages/apscheduler/executors/base.py", line 125, in run_job
retval = job.func(*job.args, **job.kwargs)
File "/home/pi/SDL_Pi_WeatherSense/wirelessSensors.py", line 547, in readSensors
processWeatherSenseTB(sLine)
File "/home/pi/SDL_Pi_WeatherSense/wirelessSensors.py", line 292, in processWeatherSenseTB
state = json.loads(sLine)
File "/usr/lib/python3.7/json/__init__.py", line 348, in loads
return _default_decoder.decode(s)
File "/usr/lib/python3.7/json/decoder.py", line 340, in decode
raise JSONDecodeError("Extra data", s, end)
json.decoder.JSONDecodeError: Extra data: line 1 column 12 (char 11)
Extra data: line 1 column 12 (char 11)
File "/usr/local/lib/python3.7/dist-packages/apscheduler/executors/base.py", line 125, in run_job
retval = job.func(*job.args, **job.kwargs)
File "/home/pi/SDL_Pi_WeatherSense/wirelessSensors.py", line 547, in readSensors
processWeatherSenseTB(sLine)
File "/home/pi/SDL_Pi_WeatherSense/wirelessSensors.py", line 292, in processWeatherSenseTB
state = json.loads(sLine)
File "/usr/lib/python3.7/json/__init__.py", line 348, in loads
return _default_decoder.decode(s)
File "/usr/lib/python3.7/json/decoder.py", line 340, in decode
raise JSONDecodeError("Extra data", s, end)

Jason Senior Member Posts: 482 Raspberry Pi: Yes	WeatherSense Data Mar 4, 2021 7:17:32 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Jason on Mar 4, 2021 7:17:32 GMT -8 Yeah I'm thinking a try/except needs to be added to handle data that is not JSON. I'll defer to SDL on this diagnosis though b/c I'm new to LoRa. Just out of curiosity, do you know what those sensors are? Jason

Jason Senior Member Posts: 482 Raspberry Pi: Yes	WeatherSense Data Mar 4, 2021 14:27:03 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Jason on Mar 4, 2021 14:27:03 GMT -8 The print(sLine) statement should’ve dumped the reading data. Jason

SDL
Global Moderator

Posts: 5,655
Raspberry Pi: Yes
Other Device: PC, arduino, beagleBone

WeatherSense Data Mar 4, 2021 15:01:44 GMT -8 Jason likes this

Quote

Post by SDL on Mar 4, 2021 15:01:44 GMT -8

I think the biggest initial problem is the version of rtl_433 he is using is not the SDL modified WeatherSense version. W needs to fix that first.

Here is the approved version:

github.com/switchdoclabs/rtl_433

Try that and let's see where you are.

BP

wshealy
Full Member

Posts: 187
Raspberry Pi: Yes

WeatherSense Data Mar 4, 2021 15:35:58 GMT -8 Jason likes this

Quote

Post by wshealy on Mar 4, 2021 15:35:58 GMT -8

BP
That worked. Could of sworn I did all that before.

I killed SkyWeather2 and its dash and of course now I'm missing the camera and AQI.

How are WeatherSense and Sky2 related? Can I run both?

Also noted...

ReadingCount=: 39

skipping write to database

Thanks
W

Last Edit: Mar 4, 2021 15:37:56 GMT -8 by wshealy

wshealy Full Member Posts: 187 Raspberry Pi: Yes	WeatherSense Data Mar 4, 2021 15:55:12 GMT -8 Jason likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by wshealy on Mar 4, 2021 15:55:12 GMT -8 Jason, Input data into Node-RED MQTT IN w/weathersense/# as topic and Debug print data to debug panel. Deployed Data!!! Thanks Wallace
	Last Edit: Mar 4, 2021 16:27:19 GMT -8 by wshealy

Jason
Senior Member

Posts: 482
Raspberry Pi: Yes

WeatherSense Data Mar 4, 2021 16:45:35 GMT -8

Quote

Post by Jason on Mar 4, 2021 16:45:35 GMT -8

Mar 4, 2021 15:01:44 GMT -8 SDL said:

I think the biggest initial problem is the version of rtl_433 he is using is not the SDL modified WeatherSense version. W needs to fix that first.

Here is the approved version:

github.com/switchdoclabs/rtl_433

Try that and let's see where you are.

BP

Oh boy did I swing and miss on that one!

Jason

Jason Senior Member Posts: 482 Raspberry Pi: Yes	WeatherSense Data Mar 4, 2021 16:59:21 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Jason on Mar 4, 2021 16:59:21 GMT -8 Mar 4, 2021 15:55:12 GMT -8 wshealy said: Jason, Input data into Node-RED MQTT IN w/weathersense/# as topic and Debug print data to debug panel. Deployed Data!!! Thanks Wallace Congratulations! Jason

wshealy
Full Member

Posts: 187
Raspberry Pi: Yes

WeatherSense Data Mar 4, 2021 17:03:36 GMT -8

Quote

Post by wshealy on Mar 4, 2021 17:03:36 GMT -8

Jason,
We need to talk. I need to get my head around a plan for what is next. I am thinking of inputting my zwave devices etc and doing things like close the shade at sunset or open sunlight to let out hot air but only on nice days etc.
Thanks again,
Wallace

Jason Senior Member Posts: 482 Raspberry Pi: Yes	WeatherSense Data Mar 4, 2021 17:53:45 GMT -8 SDL likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Jason on Mar 4, 2021 17:53:45 GMT -8 I’m in the Eastern time zone so let me know what times are good for you to chat. Jason

Post by wshealy on Mar 3, 2021 22:19:47 GMT -8

Post by Jason on Mar 4, 2021 4:23:24 GMT -8

Post by wshealy on Mar 4, 2021 7:13:47 GMT -8

Post by Jason on Mar 4, 2021 7:17:32 GMT -8

Post by Jason on Mar 4, 2021 14:27:03 GMT -8

Post by SDL on Mar 4, 2021 15:01:44 GMT -8

Post by wshealy on Mar 4, 2021 15:35:58 GMT -8

Post by wshealy on Mar 4, 2021 15:55:12 GMT -8

Post by Jason on Mar 4, 2021 16:45:35 GMT -8

Post by Jason on Mar 4, 2021 16:59:21 GMT -8

Post by wshealy on Mar 4, 2021 17:03:36 GMT -8

Post by Jason on Mar 4, 2021 17:53:45 GMT -8

Quick Reply