Post by armagidden on Aug 16, 2021 18:10:04 GMT -8
Hi all,
I seem to be almost done with my initial setup but I don't seem to be reading values from the sensors into the website
rtl_433 shows data coming in from the SDR:
bit_offset=248
bit_buffer->bits_per_row[0]=224
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2021-08-16 18:48:00
model : Ambient Weather F007TH Thermo-Hygrometer House Code: 88 Channel : 1
Battery : OK Temperature: 77.2 F Humidity : 45 % Integrity : CRC
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2021-08-16 18:48:00
model : SwitchDoc Labs F016TH Thermo-Hygrometer House Code: 88 Model Number: 5 Channel : 1
Battery : OK Temperature: 77.2 F Humidity : 45 % Integrity : CRC
bit_offset=378
bit_buffer->bits_per_row[0]=354
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2021-08-16 18:48:10
model : SwitchDoc Labs FT020T AIO Device : 12 Serial Number: 0
Battery Low: 0 Ave Wind Speed: 0 Gust : 0 Wind Direction: 23 Cum Rain : 36
Temperature: 1099 Humidity : 51 Light : 659 UV Index : 2 Integrity : CRC
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2021-08-16 18:48:10
model : SwitchDoc Labs FT020T AIO Device : 12 Serial Number: 0
Battery Low: 0 Ave Wind Speed: 0 Gust : 0 Wind Direction: 23 Cum Rain : 36
Temperature: 1099 Humidity : 51 Light : 659 UV Index : 2 Integrity : CRC
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
But strangely - sudo python3 testWirelessSensors.py
never actually updates with any sensor data.
The SkyWeather page just shows no value defaults:
Any ideas on what would cause this?
Thank you in advance for your assistance!
I seem to be almost done with my initial setup but I don't seem to be reading values from the sensors into the website
rtl_433 shows data coming in from the SDR:
bit_offset=248
bit_buffer->bits_per_row[0]=224
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2021-08-16 18:48:00
model : Ambient Weather F007TH Thermo-Hygrometer House Code: 88 Channel : 1
Battery : OK Temperature: 77.2 F Humidity : 45 % Integrity : CRC
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2021-08-16 18:48:00
model : SwitchDoc Labs F016TH Thermo-Hygrometer House Code: 88 Model Number: 5 Channel : 1
Battery : OK Temperature: 77.2 F Humidity : 45 % Integrity : CRC
bit_offset=378
bit_buffer->bits_per_row[0]=354
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2021-08-16 18:48:10
model : SwitchDoc Labs FT020T AIO Device : 12 Serial Number: 0
Battery Low: 0 Ave Wind Speed: 0 Gust : 0 Wind Direction: 23 Cum Rain : 36
Temperature: 1099 Humidity : 51 Light : 659 UV Index : 2 Integrity : CRC
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2021-08-16 18:48:10
model : SwitchDoc Labs FT020T AIO Device : 12 Serial Number: 0
Battery Low: 0 Ave Wind Speed: 0 Gust : 0 Wind Direction: 23 Cum Rain : 36
Temperature: 1099 Humidity : 51 Light : 659 UV Index : 2 Integrity : CRC
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
But strangely - sudo python3 testWirelessSensors.py
never actually updates with any sensor data.
The SkyWeather page just shows no value defaults:
Any ideas on what would cause this?
Thank you in advance for your assistance!