|
Post by Jason on Nov 15, 2021 8:16:08 GMT -8
Since there is a declared function in wirelessSensors.py titled processWeatherSenseGeneric() I figured it might be assumed that SDL has done some testing beyond simply the defined and numbered WeatherSense products. We're remodeling a room in our home and I have purchased several smart Lutron products. According to the Lutron literature, communication between the smart devices and smart bridge is accomplished over 434MHz using ClearConnect(which I assume is proprietary). I've read a bit about the rtl_433 software and it appears it will actually receive transmissions in the 432-434MHz range. In the testing done to develop the WeatherSense products, have you tested reception of signals in the 432-434MHz range? Or strictly 433MHz?
Thanks,
Jason
|
|
|
Post by SDL on Nov 16, 2021 18:47:25 GMT -8
Those signals are VERY likely to be running at 433MHz. or 433.9MHz. VERY likely to be compatible.
Check to see if someone has added those to rtl_433MHz or run it in scan mode to look for them.
BP
|
|