Post by dertown on Aug 17, 2022 2:16:20 GMT -8
After the rad sensor failed due to a bad battery. Weather sense does not seem to get any data data.
The devices is empty
when i run rtl_433 -q -F json -R 146 -R 147 -R 148 -R 150 -R 151 -R 152
I get the following the output
pi@SwitchDocLabs:~/SDL_Pi_WeatherSense $ sudo python3 WeatherSenseMonitor.py
using updateWebConfig
-----------------
WeatherSense Monitoring Software
Software Version V016
-----------------
Pending jobs:
readSensors (trigger: date[2022-08-17 05:17:59 EDT], pending)
startMQTT (trigger: date[2022-08-17 05:17:59 EDT], pending)
cleanPictures (trigger: cron[day='*', hour='3', minute='4'], pending)
cleanTimeLapses (trigger: cron[day='*', hour='3', minute='10'], pending)
buildTimeLapse (trigger: cron[day='*', hour='5', minute='30'], pending)
readSensors (trigger: date[2022-08-17 05:17:59 EDT], pending)
-----------------
Scheduled Jobs
-----------------
######
Read Wireless Sensors
######
creating new MQTT instance
connecting to broker
######
Read Wireless Sensors
######
Jobstore default:
buildTimeLapse (trigger: cron[day='*', hour='5', minute='30'], next run at: 2022-08-17 05:30:00 EDT)
cleanPictures (trigger: cron[day='*', hour='3', minute='4'], next run at: 2022-08-18 03:04:00 EDT)
Connected with result code 0
starting 433MHz scanning
######
starting 433MHz scanning
######
cleanTimeLapses (trigger: cron[day='*', hour='3', minute='10'], next run at: 2022-08-18 03:10:00 EDT)
-----------------
startime= 2022-08-16 05:00:00
endtime= 2022-08-17 05:00:00
devices= []
The devices is empty
when i run rtl_433 -q -F json -R 146 -R 147 -R 148 -R 150 -R 151 -R 152
I get the following the output
pi@SwitchDocLabs:~ $ rtl_433 -q -F json -R 146 -R 147 -R 148 -R 150 -R 151 -R 152
rtl_433 version -128-NOTFOUND branch master at 202204011242 inputs file rtl_tcp RTL-SDR
Use -h for usage help and see https://triq.org/ for documentation.
Trying conf file at "rtl_433.conf"...
Trying conf file at "/home/pi/.config/rtl_433/rtl_433.conf"...
Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...
Trying conf file at "/etc/rtl_433/rtl_433.conf"...
quiet option (-q) is default and deprecated. See -v to increase verbosity
Consider using "-M newmodel" to transition to new model keys. This will become the default someday.
A table of changes and discussion is at https://github.com/merbanan/rtl_433/pull/986.
Registered 6 out of 153 device decoding protocols [ 146-148 150-152 ]
usb_claim_interface error -6