Post by crmabs on May 29, 2017 4:24:19 GMT -8
Hi,
It's a proof of concept node-red flow. Finally I got it working. It uses the I2c muxer board from SDL. (thanks for the studry device)
www.melon.hu/andras/atmobox_oledflow.gif
Not the best photo, but this how the oled portion of the setup looks like. The catch is that all the three oleds have the same I2C address.
And the muxer with the usual "step through all the channels and open sesame!" flashing.
www.melon.hu/andras/sdli2cmuxer.gif
It's a proof of concept node-red flow. Finally I got it working. It uses the I2c muxer board from SDL. (thanks for the studry device)
www.melon.hu/andras/atmobox_oledflow.gif
Not the best photo, but this how the oled portion of the setup looks like. The catch is that all the three oleds have the same I2C address.
And the muxer with the usual "step through all the channels and open sesame!" flashing.
www.melon.hu/andras/sdli2cmuxer.gif
