|
Post by rahlquist on Aug 17, 2017 7:05:10 GMT -8
So hooked up a 1Wh battery to my SunControl and a mini USB power source to top it off yesterday (should have been nearly full charge already). I noticed the only LED on the lower left of the board to light up was the far left bottom one and it lit up amber. According to page 9 of the PDF for the board this LED should be green, and should indicate charging. The amber one should be the Done LED and it should illuminate when charge is complete. I thought nothing of it at the time, but this morning I found the Charge LED still lit, and the Done led was not. Yes, the red input power LED was lit.
Is there a mixup here? The more I read it the more I think the table on Pg 9 has the orange and green Charge/Done LED's reversed.
|
|
|
Post by SDL on Aug 17, 2017 16:53:29 GMT -8
Wow, what a catch. Yes, the table has the colors wrong. Orange is charging and green is done. We will fix that in our next revision of the manual. The cables on the board are correct, thank heavens.
Thanks again.
BP
|
|
|
Post by rahlquist on Aug 18, 2017 3:30:00 GMT -8
Happy to help. This was one of the least troublesome kickstarters I have ever been involved in.
|
|