|
Post by tadpol on Apr 18, 2018 4:38:12 GMT -8
I recently got a ThunderBoard from Amazon, and I'm not able to talk to it. I connected it to an Arduino and try the example sketches and got nothing. So then I connected it to a Bus Pirate and scanned the I2C bus and it didn't see anything either. I'm wondering if I got a dud or some such. Based on the data sheet, I also wonder if somehow mine is still in SPI mode.
The serial number on the board is 0240-092917-01.
Any thoughts on what debugging steps I should take next? Or do I call it dead and move on? Also are the schematics for this board somewhere that I could look at as well?
|
|
|
Post by SDL on Apr 18, 2018 10:31:41 GMT -8
Hmmm. Sounds like you have a dead board.
Here is an RMA for the board. As soon as we get it, we will test it, and send it back to you (or if it is bad, a new one!).
SwitchDoc Labs RMA#041818-01 909 S Shelly Lake Lane Spokane Valley, WA 99037
Make sure you include your shipping address!
Best, BP
|
|
|
Post by tadpol on May 1, 2018 3:57:26 GMT -8
Did it arrive?
|
|
|
Post by SDL on May 2, 2018 7:09:55 GMT -8
I think I saw it on John's desk this morning. He will look at it on Friday, which is when he does RMA requests.
BP
|
|