danny
New Member
Posts: 1
|
Post by danny on Apr 30, 2018 12:12:35 GMT -8
Hi, I would like to know if the USB PowerControl Board can be used as a USB extender. I have a project where I would like to digitally turn on and off a USB connection, and I would like to know if this board can be used in that manner, or if it only controls power to the board it's connected to. Thanks in advance!
|
|
|
Post by SDL on Apr 30, 2018 12:47:26 GMT -8
Danny,
Not sure what you are asking. This power board turns power on and off to the USB connector on the board. Only the unit that is plugged into the USB Out connector.
BP
|
|
|
Post by danny2 on Apr 30, 2018 13:46:15 GMT -8
Thanks BP. So if I understand you correctly, the data pins between the male and female usb's are not connected?
|
|
|
Post by SDL on May 2, 2018 7:08:39 GMT -8
The data pins are connected. The USB PowerControl board only shuts off the power to the outgoing plug.
BP
|
|