Post by triggerfish on Sept 11, 2019 5:57:53 GMT -8
Ok, basically when I connect everything as described in the documentation, the battery drains below a set point, after which the software shuts down. The watchdog is not beeing kicked anymore and cuts down the power, powering down the whole setup.
The sun is charging my battery again, but my system will never power up again, until i disconnect the wire between the power control board and the watchdog. Then it powers up immedeatly and thing start up again. When I leave it that way, the power will not be cut after the battery is drained again, because there is no connection anymore between the watchdog and power controller. So I have to disconnect and reconnect the wire shortly to regain power on the system and set it up for a new power down.
That proces is now faked with the relay...
