Blynk app and WeatherGrove PI project

I add this to the bottom of the coflocal.py file. i am using the issued auth key in my actual script.
I put my changes in blue  in the script below:

# Blynk configuraton section
USEBLYNK = True
BLYNK_AUTH = 'my auth keyxxxxxxxxxxxxxxxxxx'
BLYNK_URL = 'http://blynk-cloud.com/'

I have a PingableRouterAddress. I setup the password for MySQL and setup the address for the router in this script also.
I have pinged my router from the raspberry pi.
I am not able to get the Blynk app to populate data.
I am able to get to the blynk site from the browser in the raspberry pi.

#
#
# configuration file - contains customization for exact system
# JCS 11/8/2013
#

# it is a good idea to copy this file into a file called "conflocal.py" and edit that instead of this one. This file is wiped out if you update GroveWeatherPi.



mailUser = "yourusename"
mailPassword = "yourmailpassword"

notifyAddress ="you@example.com"

fromAddress = "yourfromaddress@example.com"

textnotifyAddress = "yourphonenumber@yourprovider"

#MySQL Logging and Password Information

enable_MySQL_Logging = True
MySQL_Password = "my data base password"  ## not my real password

# modify this IP to enable WLAN operating detection - search for WLAN_check in GroveWeatherPi.py
enable_WLAN_Detection = True
PingableRouterAddress = "10.0.0.159"   ## My PingableRouterAddress   and tested

# WeatherUnderground Station

WeatherUnderground_Present = False
WeatherUnderground_StationID = "KWXXXXX"
WeatherUnderground_StationKey = "YYYYYYY"



# for barometeric pressure - needed to calculate sealevel equivalent - set your weatherstation elevation here

BMP280_Altitude_Meters = 648.0

# device present global variables

Lightning_Mode = False
SolarPower_Mode = False

TCA9545_I2CMux_Present = False
SunAirPlus_Present = False
AS3935_Present = False
DS3231_Present = False
BMP280_Present = False
FRAM_Present = False
HTU21DF_Present = False
HDC1080_Present = False
AM2315_Present = False
ADS1015_Present = False
ADS1115_Present = False
OLED_Present = False
WXLink_Present = False
Sunlight_Preset = False

# if the WXLink has stopped transmitting, == False
WXLink_Data_Fresh = False
WXLInk_LastMessageID = 0

# Blynk configuraton section    ##  lines I added to script
USEBLYNK = True
BLYNK_AUTH = 'my keyxxxxxxxxxxxxxx'       ## not my actual auth code that i was given
BLYNK_URL = 'http://blynk-cloud.com/'