|
|
Post by fedora on May 10, 2013 9:17:55 GMT -8
How do I set the Blinking LED control to blink with a different frequency then the data?
|
|
|
|
Post by SDL on May 10, 2013 19:01:52 GMT -8
From the manual on the website: Frequency Modulated LED  Frequency Modulated LED controls in the RasPiConnect App use the following: Input - None Response - Return A,B,C A is the float value indicating how fast to flash the LED in seconds B is the float value to display on the RasPiConnect Frequency Modulated Control C is a string value (not containing any commas) to display on the RasPiConnect Frequency Modulated Control example return: 0.5, 32.3, Greenhouse Temperature (C) This would toggle the LED on the RasPiConnect App every 0.5 seconds. |
|
mike
New Member
Posts: 5 
|
Post by mike on Jul 20, 2013 8:54:27 GMT -8
Please supply a link to the "Manual". Its location is really not obvious.
|
|
mike
New Member
Posts: 5
|
Post by mike on Jul 20, 2013 9:00:01 GMT -8
I think I found it - I assume you were referring to the wiki? |
|
|
|
Post by SDL on Jul 20, 2013 16:35:28 GMT -8
Yes, all of our documentation is under the "document" link to our wiki.
BP
|
|
