Reversed one of sensor plugs into Grover 12c to pi board

michaelkremer
New Member

Posts: 1

Reversed one of sensor plugs into Grover 12c to pi board Feb 24, 2019 11:34:11 GMT -8

Quote

Post by michaelkremer on Feb 24, 2019 11:34:11 GMT -8

I inadvertently plugged one of the sensor connectors in reverse. Nothing happened when the Pi was turned on. No blue LED lights came on. The raspberry pi red light came on and the pi worked as usual. I assume I fried the Grove 12c to Pi board. Would any of the other components be affected by my error? Can I just replace the Grove 12 to Pi board and try again.

SDL
Global Moderator

Posts: 5,655
Raspberry Pi: Yes
Other Device: PC, arduino, beagleBone

Reversed one of sensor plugs into Grover 12c to pi board Feb 24, 2019 17:25:21 GMT -8

Quote

Post by SDL on Feb 24, 2019 17:25:21 GMT -8

Hard to say, but if the Pi came back on, you can probably just replace the Pi2Grover board. How did you ever get one of those Grove connectors in backwards!

You, sir, are the first. We all pay homage to you.

BP

mjk Guest	Reversed one of sensor plugs into Grover 12c to pi board Feb 25, 2019 5:42:49 GMT -8 SDL likes this Quote Select Post Deselect Post Link to Post Back to Top Post by mjk on Feb 25, 2019 5:42:49 GMT -8 bad eyesight and the cable didn't have the hold down clip on the connector ... just the rails, no hook.

SwitchDoc Labs Product Support

Reversed one of sensor plugs into Grover 12c to pi board

Post by michaelkremer on Feb 24, 2019 11:34:11 GMT -8

Post by SDL on Feb 24, 2019 17:25:21 GMT -8

Post by mjk on Feb 25, 2019 5:42:49 GMT -8

Quick Reply