|
Post by Powderjockey on May 25, 2023 18:21:23 GMT -8
Look under the TB433MHZ table. That's the lightning database BP MariaDB [WeatherSenseWireless]> select * from TB433MHZ; Empty set (0.001 sec) MariaDB [WeatherSenseWireless]>
|
|
|
Post by Powderjockey on May 22, 2023 15:19:17 GMT -8
Battery Voltage: 0.00 V Battery Current: 0.00 mA Solar Panel Voltage: 0.00 V Solar Current: 0.00 mA Load Voltage: 0.00 V Load Current: 0.00 mA Currentmillis() = 96216 You aren't reading the solar power stuff. Something is wired wrong. Also, check your database. . Is there anything in the database from the lightning sensor? BP Nothing is showing on the WR3 Power page. Which database should I be looking in? No Lightning Sensor noted in the WeatherSenseWireless.db
|
|
|
Post by Powderjockey on May 8, 2023 18:42:52 GMT -8
Open up the lightning detector and look at the output on the USB port. Post it. Is there anything in the database from the lightning sensor? Has there been any lightning? BP Lightning_Serial_Output.txt (5.73 KB) there has been some lightning, a couple of weeks ago and there was nothing recorded.
|
|
|
Post by Powderjockey on May 8, 2023 18:33:59 GMT -8
Show us the first 200 lines or so of the serial output from the Mini Pro Plus. From the USB plug. That will tell us if you are talking to the Renogy. Could be a wiring problem. BP Attached is the output from the WR3 serial output WR3 Serial Output.txt (30.5 KB)
|
|
|
Post by Powderjockey on May 3, 2023 15:13:51 GMT -8
Nothing showing up in the Lightning tab tho. Lightning sensor added to a separate Mini Pro Plus and another 433 MHz transmitter. Any idea on why the Lightning Module is not showing any data?
|
|
|
Post by Powderjockey on May 3, 2023 15:10:21 GMT -8
I'm wondering if I have something not set correctly as there is nothing showing in Dash for the WR3Power.
Any ideas? Thanks Scott
|
|
|
Post by Powderjockey on Apr 30, 2023 11:05:24 GMT -8
Is it possible to also send data to the Wunderground? The reason I ask, my underground sprinler system is set up to receive data from my weather station/Wunderground data.
Thanks Scott
|
|
|
Post by Powderjockey on Apr 30, 2023 11:01:04 GMT -8
This is probably a stupid question, but where is the best location to mount the WR3? The cabling that comes with the station is not very long.
Any pictures of the University of Idaho's installations?
Thanks Scott
|
|
|
Post by Powderjockey on Apr 26, 2023 18:10:37 GMT -8
OK, I have some numbers now. Restarted the system again tonight and I have WR3 data showing up in the Dash. Nothing showing up in the Lightning tab tho. Lightning sensor added to a separate Mini Pro Plus and another 433 MHz transmitter.
|
|
|
Post by Powderjockey on Apr 25, 2023 18:23:22 GMT -8
It's got to be a wiring problem. You do HAVE to have a battery connected to the Renogy for that to work. That might be your whole problem. You probably don't have 12 V anywhere. BP Connected to a test bench battery and still not getting anything out. I get this output on one of the terminals pandas only supports SQLAlchemy connectable (engine/connection) or database string URI or sqlite3 DBAPI2 connection. Other DBAPI2 objects are not tested. Please consider using SQLAlchemy.
/home/pirack/SDL_Pi_WeatherSense/dash_app/lightning_page.py:152: UserWarning:
pandas only supports SQLAlchemy connectable (engine/connection) or database string URI or sqlite3 DBAPI2 connection. Other DBAPI2 objects are not tested. Please consider using SQLAlchemy.
/home/pirack/SDL_Pi_WeatherSense/dash_app/lightning_page.py:153: FutureWarning:
The default dtype for empty Series will be 'object' instead of 'float64' in a future version. Specify a dtype explicitly to silence this warning.
/home/pirack/SDL_Pi_WeatherSense/dash_app/lightning_page.py:210: UserWarning:
pandas only supports SQLAlchemy connectable (engine/connection) or database string URI or sqlite3 DBAPI2 connection. Other DBAPI2 objects are not tested. Please consider using SQLAlchemy. The Dash browser page still show a bunch of zeros. The WR3 does have a flashing red led under one of the middle covers which was there before. That part is start.
|
|
|
Post by Powderjockey on Apr 20, 2023 7:38:20 GMT -8
Expensive, but that looks right. BP Canadian dollars, everything is expensive here!
|
|
|
Post by Powderjockey on Apr 17, 2023 15:44:05 GMT -8
You are not talking to the WeatherRack3 or the Renogy. There is a wiring problem. Do the lights on the WR3 board flash? and which ones flash? BP At the present time I DO NOT have the board connected to the Solar Panel. It is connected to the USB on the computer so the script could up uploaded to the Mini Pro Plus. I left attached this way in the house for testing. Thes images show the various lights that flash during the cycle.
|
|
|
Post by Powderjockey on Apr 15, 2023 18:59:43 GMT -8
Please post the serial output from the GroveMiniPlus hooked up to the WeatherRack3. We need to figure out if you are getting the data or it is a transmission problem. BP Do you have instructions to attached the Grove 433MHZ transmittor/receiver to the Mini Pro Plus? I'll get the data from the serial monitor and post.
|
|
|
Post by Powderjockey on Apr 14, 2023 12:36:59 GMT -8
I have installed the Thunderboard as per the instructions, less the solar power stuff, and installed the Arduino sketch onto/into the Grove Mini Pro Plus. Since I don't have the 3 prong 433 sender, I have attempted to added the Grove 433MHz Simple RF Link Kit to the Grove Mini Pro Plus board.
The Arduino Serial Monitor is advising the Thunderboard is present and has had some activity.
############### MessageCount=0 STATUS - WeatherSenseProtocol:16 WakeState=0 wakeCount=334 Current Interrupt Source: 0x0 Last Interrupt Source: 0x0 Last Interrupt Meaning: Lightning Last Distance: 5 Interrupt Count: 80 Lightning Count:5 Lightning Timestamp:8954 Battery Voltage: 0.00 V Battery Current: 0.00 mA Solar Panel Voltage: 0.00 V Solar Current: 0.00 mA Load Voltage: 0.00 V Load Current: 0.00 mA Currentmillis() = 10242763 AuxA State:5 5 ############### No Packet sent Watchdog1 Reset - Patted the Dog timeBeforeSleep=10242969 Awake now: timeAfterSleep=10273173 SleepTime = 30204 Millis Time: 10273.17 2wakeState=2 Watchdog1 Reset - Patted the Dog wakeState=2 ############### MessageCount=0 STATUS - WeatherSenseProtocol:16 WakeState=0 wakeCount=335 Current Interrupt Source: 0x0 Last Interrupt Source: 0x0 Last Interrupt Meaning: Lightning Last Distance: 5 Interrupt Count: 80 Lightning Count:5 Lightning Timestamp:8954 Battery Voltage: 0.00 V Battery Current: 0.00 mA Solar Panel Voltage: 0.00 V Solar Current: 0.00 mA Load Voltage: 0.00 V Load Current: 0.00 mA Currentmillis() = 10273413 AuxA State:5 5 ############### No Packet sent Watchdog1 Reset - Patted the Dog timeBeforeSleep=10273619 Yet the WeatherSense software reports zeros and the Dash website also is reporting zeroz, for both the Thunderboard and the WeatherRack3.
Any ideas?
|
|
|
Post by Powderjockey on Apr 13, 2023 14:55:06 GMT -8
|
|