rdp
New Member
Posts: 28
|
Post by rdp on Jul 25, 2019 6:28:15 GMT -8
|
|
|
|
Post by SDL on Jul 25, 2019 20:06:14 GMT -8
You may have a bad temp probe, but probably not. The first thing to look at is the power supply on the unit. Are you getting a lot of noise on the power line? You can try putting a beefier power supply.
Let us know once you have tried that.
BP
|
|
rdp
New Member
Posts: 28
|
Post by rdp on Jul 27, 2019 7:14:53 GMT -8
I have switched the power supply, will see what happens in the next few days.
Thanks,
Rich
|
|
|
|
Post by SDL on Jul 27, 2019 7:28:15 GMT -8
Keep us updated!
BP
|
|
rdp
New Member
Posts: 28
|
Post by rdp on Jul 29, 2019 16:36:12 GMT -8
Still happening. Stopped reading temp this morning.
Rich
|
|
|
|
Post by SDL on Jul 30, 2019 6:54:14 GMT -8
RDP,
OK, you probably have a bad sensor. When and where did you purchase it?
BP
|
|
rdp
New Member
Posts: 28
|
Post by rdp on Jul 31, 2019 11:23:26 GMT -8
SwitchDoc Labs 06/10/19 order #: 2830
|
|
|
|
Post by SDL on Aug 2, 2019 14:07:56 GMT -8
Well, it is out of warranty, but I asked Laurie and she said replace it anyway.
PM me your shipping address and we will cross ship.
Ship yours to:
SwitchDoc Labs
RMA# 080219-02
909 S Shelley lake Lane
Spokane Valley, WA 99037
|
|
rdp
New Member
Posts: 28
|
Post by rdp on Aug 9, 2019 11:56:21 GMT -8
Got the new one in the mail yesterday and installed it at noon, so far so good.
Rich
|
|
|
|
Post by SDL on Aug 10, 2019 7:03:53 GMT -8
We are paying a LOT of attention to this problem on OurWeather. We now suspect that we got a bad batch of AM2315s that have a high failure rate on the ESP8266. Not seeing that on the Raspberry Pi or Arduino.
BP
|
|
rdp
New Member
Posts: 28
|
Post by rdp on Aug 17, 2019 5:13:16 GMT -8
|
|
|
|
Post by SDL on Aug 18, 2019 13:24:01 GMT -8
|
|
rdp
New Member
Posts: 28
|
Post by rdp on Aug 18, 2019 13:26:53 GMT -8
So the temp probe you just sent me I should send back for a different model?
Rich
|
|
|
|
Post by SDL on Aug 18, 2019 13:43:52 GMT -8
Yep. Science and engineering has finally ground out an answer. The failure rate of the AM2315 is unaceeptable on the OurWeather system. Works fine on Arduino, Raspberry Pi and ESP32 systems. We have some theories on why (after looking at the I2C wave forms which was fun) but there isn't anything we can do about the ESP8266 I2C interface without a LOT of work. forum.switchdoc.com/thread/1033/am2315-exchange-programBP |
|
rdp
New Member
Posts: 28
|
Post by rdp on Aug 18, 2019 14:02:35 GMT -8
Thank you, I will send it back in.
|
|
