|
Post by SDL on Jun 26, 2023 13:40:39 GMT -8
You already have debug turned on. Look at the output of the program.
BP
|
|
|
Post by SDL on Jun 26, 2023 13:39:41 GMT -8
It has to be a wiring problem between the Reneogy and the Mini Pro Plus. Wire that isn't connecting? You re reading the WeatherRack3 but you get nothing from the Wanderer.
BP
|
|
|
Post by SDL on Jun 26, 2023 13:37:05 GMT -8
Hard to say. I'd suspect your power supply or battery. Run it off a power supply to see.
BP
|
|
|
Post by SDL on Jun 26, 2023 13:35:04 GMT -8
go back to the previous 1.XX release of the Arduino iDE.
I can see the processor and stuff under 2.1.0.
BP
|
|
|
Post by SDL on Jun 13, 2023 5:49:05 GMT -8
Look at the information on the terminal program where you are running the python software. Turn debug on (look in the config file) and then copy and paste the data. It will look something like this:
{"time" : "2022-12-18 13:19:53", "model" : "SwitchDoc Labs WeatherRack3", "len" : 37, "messageid" : 30039, "deviceid" : 15727, "protocolversion" : 1, "softwareversion" : 0, "weathersenseprotocol" : 20, "windspeed" : 0, "windforce" : 0, "winddirectiondegrees" : 0, "humidity" : 750, "temperature" : -12, "noise" : 412, "PM2_5" : 7, "PM10" : 8, "pressure" : 937, "hwlux" : 0, "lwlux" : 7612, "lightvalue20W" : 76, "rain" : 0, "mic" : "CRC"}
BP
|
|
|
Post by SDL on Jun 13, 2023 5:45:50 GMT -8
PM me your shipping address and we will send a different transmitter. Those clearly don't work.
BP
|
|
|
Post by SDL on Jun 13, 2023 5:43:54 GMT -8
Boy, we have no idea what is wrong here. Our guest sis you aren't selecting the right esp32 model or something like that. Nothing to do with our software.
BP
|
|
|
Post by SDL on Jun 10, 2023 17:34:48 GMT -8
No alternative to WeahterStem. We are in negotiations about another company taking over SkyWeather2.
|
|
|
Post by SDL on Jun 10, 2023 17:33:22 GMT -8
You have no transmitter board plugged into the Mini Pro Plus.
I don't know if the grove transmitter and receiver will work that you have plugged in. Never tested that.
BP
|
|
|
Post by SDL on Jun 10, 2023 17:31:28 GMT -8
Can you send the latest JSON received by the python?
BP
|
|
|
Post by SDL on Jun 1, 2023 11:33:48 GMT -8
Doesn't look like this is a WR2 problem no bad data coming in. Always 558.
Could you export all the data from the weather table for 5/24/2023 and post the file?
BP
|
|
|
Post by SDL on Jun 1, 2023 11:27:35 GMT -8
Well, there is a keep alive message that the Thunderboard sends every 15 minutes by my memory. Sounds like the box is not transmitting. I need to see a much longer output from the serial monitor on the TB box.
Take a picture of the MiniProPlus so I can see the transmission board.
BP
|
|
|
Post by SDL on Jun 1, 2023 11:24:24 GMT -8
This is on the WeatherRack3?
BP
|
|
|
Post by SDL on May 23, 2023 6:15:57 GMT -8
The problem is that you are getting error values in from the WeatherRack. And somewhere the software is not converting them properly. I need to see the JSON from the WeathRack when you have a bad temperature value. That's the place to start.
BP
|
|
|
Post by SDL on May 23, 2023 6:13:00 GMT -8
Look under the TB433MHZ table.
That's the lightning database
BP
|
|