|
Post by SDL on Aug 16, 2021 17:35:54 GMT -8
027 Is going out on Thursday. I'd really like to have this fixed for that. Doxidad? Your fix would be good too.
BP
|
|
|
Post by SDL on Aug 16, 2021 12:42:27 GMT -8
You bet!
BP
|
|
|
Post by SDL on Aug 15, 2021 18:08:12 GMT -8
Doxidad,
That is a great suggestion, but what caused it to turn off in the first place? Our SD Cards work perfectly.
BP
|
|
|
Post by SDL on Aug 15, 2021 18:07:00 GMT -8
Here is what is going on:
You have to start the program in the dash_app directory. Not from the home directory. Python gets lost.
Do this:
cd /home/pi/SDL_Pi_SkyWeather2/dash_app/ sudo python3 index.py
|
|
|
Post by SDL on Aug 15, 2021 18:04:41 GMT -8
Didn't you get one of these? BP
|
|
|
Post by SDL on Aug 15, 2021 17:59:51 GMT -8
See the spike in the solar voltage? that says your battery fully charged!
BP
|
|
|
Post by SDL on Aug 13, 2021 15:44:01 GMT -8
BTW, Show us the Solar graphs.
BP
|
|
|
Post by SDL on Aug 13, 2021 15:43:39 GMT -8
I have had several Batteries go bad on my recently. Two of them cheap ones and one bad Adafruit battery (that one was in Palm Springs, so it was really, really hot).
BP
|
|
|
Post by SDL on Aug 13, 2021 14:27:53 GMT -8
What software are you running? Post a picture of the AS3935.
BP
|
|
|
Post by SDL on Aug 13, 2021 10:52:42 GMT -8
Clay, it's a bug! Having the picture on the dash_app should not be restricted by WeatherSTEM.
We found that a while ago and it is fixed in V027.
BP
|
|
|
Post by SDL on Aug 13, 2021 10:49:38 GMT -8
Pagerman,
Send me your hardware and I'll run a download test. I don't know what else to do as we can't duplicate the problem.
BP
|
|
|
Post by SDL on Aug 13, 2021 10:48:32 GMT -8
Did you pull the hat off of the Raspberry Pi and rerun the "sudo i2cdetect -y 1"? If so, post the results.
This has got to be a hardware issue of some kind as V16 works fine on all of our systems.
BP
|
|
|
Post by SDL on Aug 13, 2021 10:46:03 GMT -8
Yes, 5V is connected to VCC (or if you are supplying the board with 3.3V, it will show 3.3V).
The limitation for the current will be how much current your power supply that is driving the board (from the computer VCC usually) will supply. These aren't analog connectors. They are digital lines (well, VCC and GND can be considered analog).
BP
|
|
|
Post by SDL on Aug 13, 2021 10:44:19 GMT -8
Clay, the 24 AQI is calculated from the variables. Please show us the SQL that you are using for the above. We don't know what we are looking at.
John
|
|
|
Post by SDL on Aug 10, 2021 8:29:38 GMT -8
Running for two weeks here. I don't think sending a SkyCam Remote is going to fix this.
I'm correct in understanding that you aren't uploading anything to WeatherSTEM or WeatherUnderground?
I think you need to send me your hardware.
BP
|
|